| Item | Common to all models | |
|---|---|---|
| Fixed input points | 1 point (Polarity switchable) | |
| Selected input points | 5 points (Polarity switchable) | |
| Input form | Photocoupler isolated input (Applicable to both current sink / source output) | |
| Fixed function | ALARM IN | HIGH alarm occurrence |
| Selecting function | OFF | Do not use terminals |
| LOAD ON | Turn on the load | |
| LOAD OFF | Turn off the load | |
| LOAD CTRL | Turn on of off the load | |
| L ALARM IN | LOW alarm occurrence | |
| ALARM CLR | LOW alarm clearance | |
| SEQ RUN | Sequence start/end | |
| SEQ PAUSE | Sequence pause/resume | |
| SEQ TRIG IN | Input the trigger for sequence | |
| ACQUIRE TRIG | Input the measurement trigger | |
| MEM1 RECALL | Recall preset memory 1 | |
| MEM2 RECALL | Recall preset memory 2 | |
| INTEG CTRL | Starting/stopping integration measurement | |
| INTEG RESET | Resetting integration measurement data | |
| External circuit power supply range | 12 V to 24 Vdc (±10 %) | |
This table is part of the specifications for:High-Capacity Regenerative Electronic Load PXZ Series
