PCR-LE_General

Item/ModelPCR500LEPCR1000LEPCR2000LEPCR3000LEPCR4000LEPCR6000LEPCR9000LE
 3P3W 200V3P4W 400V3P3W 200V3P4W 400V
Insulation resistanceBetween input and chassis, output and chassis, and input and output500 Vdc, 30 MΩ or more500 Vdc, 10 MΩ or more
Withstanding voltageBetween input and chassis, output and chassis, and input and output1.5 kVac for 1 minute
Circuit methodLinear amplifier system
Environmental conditionsOperating environmentIndoor use, overvoltage category II
Operating temperature range0 °C to +50 °C (32 °F to +122 °F)
Storage temperature range-10 °C to +60 °C (14 °F to 140 °F)
Operating humidity range20 %rh to 80 %rh (no condensation)
Storage humidity range90 %rh or less (no condensation)
AltitudeUp to 2000 m
WeightApprox. 17 kg (37.48 lb)Approx. 35 kg (77.16 lb)Approx. 55 kg (121.25 lb)Approx. 82 kg (180.78 lb)Approx. 96 kg (211.64 lb)Approx.140 kg (308.6 Ibs)Approx.190kg (418.8 Ibs)
Input terminal(Inlet)M4M5M8M8M8M5M5M5M5
Output terminalM4M4M4M5M5M8M8M8M8M8
AccessoriesPower cord1 pc. With plug, Length: 3 mThe input power cable is not included. Please refer to the list of ordering information specified on the last page.
Heavy Duty Warning Seals1 disc
Setup guide1 copy
Quick Reference1 each for English and Japanese
Safety information1 copy
CD-ROM1 disc
Electromagnetic compatibility (EMC) *5 *6Complies with the requirements of the following directive and standard. EMC Directive 2014/30/EU EN61326-1 (ClassA *7), EN55011 (ClassA *7, Group1 *8) EN61000-3-2, EN61000-3-3 Applicable conditions: All cables and wires connected to this product must be less than 3 mComplies with the requirements of the following directive and standard. EMC Directive 2014/30/EU EN61326-1 (ClassA *7), EN55011 (ClassA *7, Group1 *8) Applicable conditions: All cables and wires connected to this product must be less than 3 m
Safety *5Complies with the requirements of the following directive and standard. Low Voltage Directive 2014/35/EU *6 EN61010-1 Class I *9, Pollution Degree2

*5 Not applicable to custom-ordered or modified products. *6 Only for models with CE marking displayed on the panel. *7 This product is a Class A device. It is intended for use in an industrial environment. Use of this product in a residential area may cause interference. In such cases, special measures to reduce electromagnetic emissions by the user may be necessary to prevent interference with radio and television broadcast reception. *8 This product is a Group 1 device. This product does not intentionally generate/use radio frequency energy in the form of electromagnetic radiation, induction and/or electrostatic coupling for material processing or inspection/analysis. *9 This product is a Class I device. Be sure to ground the protective conductor terminals of this product. Safety is not guaranteed if not properly grounded.