PWR-01 Series
よくあるご質問 閲覧ランキング
- 耐電圧(耐圧)試験って何ですか?
- 直流電源を接続する配電盤のブレーカ選定について教えてください。
- 検査票、試験成績書、校正証明書、トレーサビリティ証明書について教えてください。
- 電波法の高周波利用設備に該当する製品はありますか。
- VISAライブラリについて教えてください。
- ウォームアップ時間はどれくらいですか。
- 製品に電安法適用表示(PSEマーク)がありません。違法ではないですか。
- 耐電圧試験器を操作するために、必要な資格はありますか。
- PWR-01シリーズのPOWER スイッチをオンにしても動作しません。どうしたら良いでしょうか。
- 製品におけるPCB含有の有無について教えてください。
- マニュアル通りにコマンドを送っているのですが動作しません。どうしたらよいでしょうか。
- Does PWR-01 series have a variable internal resistance function?
- Can PWR-01 series perform a short interruption test?
- What is the voltage ripple noise of PWR-01 series?
- Is there a low-leakage current model in PWR-01 series?
- Which residual current devices (RCDs) can be used for PWR-01 series?
- What is the withstanding voltage of PWR-01 series?
- Can banana plugs be used for the front output terminals of PWR-01 series?No, banana plugs cannot be used, as they may cause electric shock. Please use the optional safety plugs TL41 (screw connection type) and TL42 (solder connection type). For the details, read the user’s manual – chapter of Preparation – Connecting to the Output Terminals – Connecting to the front-panel output terminals.
- What is the isolation voltage (AC line-to-ground) for PWR-01 series?
- Can PWR-01 series be connected to and controlled by a PC via a USB interface using PIA4850?
- Can PWR-01 series check statuses such as constant voltage (CV) and constant current (CC) through the communication interface?
- I ground the positive (+) output terminal of PWR-01 series. Can you provide details on the isolation of its external control signals?
- Is the optional rack mount adapter KRA3 for PWR-01 series compatible with the EIA standard?
- Is output on/off control available via an external contact on PWR-01 series?
- What is the communication speed when VSET and OUTPUT ON are performed via the LAN interface in PWR-01 series?
- How do I set up external voltage control for output current in PWR-01 series?
- Are there any protection functions specific to the front-panel output terminals of PWR-01 series?
- Does Wavy for PWR-01 series support Windows 10?
- Is it possible to monitor voltage and current while controlling multiple PWR-01 units with Wavy?
- Can PWR-01 series be controlled by a programmable logic controller (PLC)?
- Does PWR-01 series have a cover on the front-panel output terminals?
- What should I do if PWR-01 series has high output ripple under the external control?
- How do I synchronize the bleeder speed of two PWR-01 series during the master-slave parallel operation?
- Can I use the external monitoring on PWR-01 series to monitor the output voltage and current?
- Is it possible to record a data of the output voltage/current of PWR801L with a data logger?
- What should I do if PWR-01 series cannot be powered on by tuning the POWER switch on?





